Wellborn Kitchen Remodeling Nationwide

Wellborn Kitchen Remodeling: The Los Angeles Owner’s Guide

Wellborn kitchen remodeling in Los Angeles typically costs $16,520 to $53,100 when it involves replacing or rebuilding failed cabinetry, drawer systems, hinges, or door fronts within an existing Wellborn layout. Most owners discover the problem the same way: a drawer that no longer closes flush, a hinge that’s stripped out of its bore, or a cabinet face that’s delaminating at the edges after years of Southern California heat and coastal moisture cycling. We stock Wellborn-compatible hardware and can order exact-model door and drawer fronts, usually within 5 to 10 business days for painted and stained finishes.

Call (470) 298-9650

Rowan Construction Group is an independent contractor, not affiliated with Wellborn. What that means for you is we buy parts at trade pricing and install them under our own written warranty, with a documented photo record of every visit.

Key Takeaways

• Installed price range: $16,520 to $53,100 for a full Wellborn kitchen remodel; individual part replacements like hinges, slides, and door fronts are quoted line-by-line at a flat written price.
• What fails first: soft-close dampers, hinge plates, and drawer glides. They wear out faster in Los Angeles because of fine dust and repeated temperature swings.
• OEM vs aftermarket: Wellborn uses specific bore spacing (typically 35mm European cup hinges on newer lines, but older series vary). We match the part to the cabinet, not the brand name alone.
• Turnaround: hardware swaps are often same-day. Matching door fronts and drawer boxes take 5 to 10 business days from order.
• Warranty: every installation is covered by our 365-Day Done Right Promise. If it is not done right, we make it right.

Which Wellborn Models This Applies To

Wellborn has produced cabinet lines for decades, and the hardware and door profiles are not uniformly interchangeable across every series. In Los Angeles kitchens we most often see the Wellborn Premier, Estate, and Select series, along with the newer Wellborn Closets and Prestige lines in homes remodeled after 2015. The compatibility gotcha is hinge boring: most Wellborn cabinets from the last 15 years use a standard 35mm cup bore, but some drawer fronts on Estate and older lines use 26mm or non-standard spacing. We measure the bore and the overlay before ordering, because ordering the wrong hinge converts a $45 part into a $300 rework.

For door and drawer fronts, the measurement that matters is the exact face dimension plus the edge profile. Wellborn uses a handful of profiles – square, rounded, and ogee – and a door ordered with the wrong profile sits visibly off against its neighbor. We also confirm the finish code. Wellborn’s painted finishes are not one white; they run a spectrum from Bone to Pearl to Antique White, and the code is stamped inside the drawer box on most post-2010 builds. OEM fronts run 30 to 60 percent more than quality aftermarket equivalents. For painted cabinets in a Los Angeles kitchen with strong window light, the aftermarket paint match is nearly indistinguishable once installed; for stained woods like Wellborn’s classic Cherry or Maple, we recommend OEM for color consistency.

Before

After

Signs Your Wellborn Kitchen Remodeling Is Failing

• The drawer hangs or drops on one side. The undermount glide has lost its retention clip or the rear socket has wallowed out. This is the most common Wellborn call we run in Los Angeles, and it is usually a 15-minute swap if we have the glide profile on the truck.
• The door closes past the frame and bounces. The soft-close damper inside the hinge cup has blown its seal. By Los Angeles standards this is expected wear around year eight to twelve – the dampers are plastic and heat cycling shortens their life.
• The hinge is stripping out of the particleboard. The bore hole has crumbled, usually from a prior impact or years of hinge adjustment. This requires a repair plate or a re-bore, not just a hinge swap.
• The cabinet face is delaminating at the bottom corner. That is moisture. In Los Angeles, the source is usually a sink sprayer, a dishwasher steam vent, or a water line that has been weeping behind the baseboard. The face is usually reproducible; the underlying moisture source has to be found in the same visit or the replacement fails the same way.
• The corner cabinet door hits its neighbor on the swing. Either a hinge plate has shifted, or the face frame has moved with the wall. We re-square the face frame before re-hanging – adjusting a hinge to a twisted frame just moves the problem down the row.

Replacement Cost & What’s Included

In Los Angeles, a complete Wellborn kitchen remodel runs $16,520 to $53,100 depending on cabinet count, door and drawer front replacement scope, countertop and backsplash finishes, and whether walls or plumbing move. For a parts-focused job – say, swapping failed hinges and glides across twenty door and drawer positions – you are looking at roughly $95 to $240 per opening, hardware included, under a written flat price. A single replacement door front for a Wellborn painted cabinet in a standard 15-inch width typically lands between $210 and $480 installed, with OEM finish matching on the higher end.

The quote you get from us is a flat written price with a written scope. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no work proceeds on a change until the change order is signed. If a hinge inspection turns into a face-frame repair, you will sign a change order before we touch it, and the final number stays within a few percent of what you agreed to.

Every parts job includes our 365-Day Done Right Promise and a documented photo record of what we found and what we replaced – included as standard, not as an upgrade.

DIY or Call Us?

There are checks an owner can safely do. Close each door slowly and watch for bounce. Pull each drawer out and wiggle it at full extension. Look for the finish code stamped inside the drawer box. Those observations are useful when you call, and they cost nothing.

What goes wrong in DIY on Wellborn cabinets is usually the hinge adjustment. The modern Wellborn hinge has three adjustment screws – depth, side, and height – and cranking the wrong screw can tear the bore out of the particleboard and turn a $45 part into a structural repair. If the cabinet face has delaminated or the hinge is stripped, that is not a parts-bin fix. That is a call to (470) 298-9650. We will tell you over the phone whether it is a truck-stock part or an order, and the estimate is free.

FAQs

Get Your Free Wellborn Estimate

If a Wellborn cabinet door is hanging, a drawer is dragging, or a hinge has torn out, call (470) 298-9650. We will talk through what you are seeing, tell you whether it is a truck-stock part or an order, and schedule a free estimate with a written flat price before any work starts. Measure twice, say it once, show your work – that is how we run every job, including yours.

Written by Grant Rowan, Owner, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.