Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterConstruction in Danville, CA
Kitchen remodeling in Danville, CA typically runs $14,000 to $45,000 for a full project, and the single biggest cost driver is what sits under the house. Most Danville homes were built between the mid-1970s and the 1990s on Altamont clay soils that expand and contract with valley rains, which means a kitchen tear-out often reveals slab movement that has to be addressed before cabinets go back in. Our crews are background-checked and uniformed, and a live person answers calls at (470) 298-9650.
Why Danville Homes Are Different
Danville sits in the San Ramon Valley, backed against the Mount Diablo foothills, and that geography creates two construction realities you won’t find in flat-lot cities like Concord or Dublin. First, the expansive Altamont clay under many neighborhoods swells in wet winters and shrinks in 100°F summers, so slab cracks and door-frame misalignment are common even in well-kept homes. Second, any lot above Camino Tassajara or along the foothill edges falls under California’s Wildland Urban Interface fire codes, which means Class A roofing, ember-resistant vents, and ignition-resistant siding materials are often mandatory before the Town of Danville will issue a remodel permit.
The housing stock compounds this. Most of Danville’s residential inventory is large semi-custom and custom single-family homes with non-standard framing and original plans that have long since disappeared. A simple window swap or kitchen reconfiguration often becomes a structural question once a crew opens the wall. Contractors who only work flat-lot suburbs tend to underestimate the soils report requirement here; we don’t, because it’s the first thing we check on any addition or ADU.
Our Main Danville Services
Danville homeowners call about two exterior services more than any other, and each has its own page with full pricing detail.
Fence Installation in Danville
Fencing on Danville’s hillside lots isn’t just post-hole digging. Graded lots and clay movement mean posts need deeper setting and better drainage than a flat backyard in San Ramon or Walnut Creek. Redwood and aluminum are the most common materials, and WUI code can affect fence placement near structures on foothill properties. See Fence Installation in Danville for full local pricing and a breakdown of vinyl, aluminum, and wood options.
Driveway & Pavers in Danville
Driveways in Danville take abuse from summer heat and winter clay movement, which is why concrete slabs here develop cracks that flatland driveways rarely see. Paver driveways handle that soil movement better because the joints flex, and Belgard and Techo-Bloc pavers are what we install most often. See Driveway & Pavers in Danville for paver versus concrete pricing and local drainage considerations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterKitchen Remodeling in Danville
Kitchen remodeling in Danville costs between $14,000 and $45,000 for a full project, with smaller partial remodels starting around $9,000. Homes from the 1970s through 1990s dominate Danville’s housing stock, and the kitchens in those houses were built to a smaller, more compartmentalized standard; removing a wall or moving a sink line often reveals framing that was never documented on any plan. Our Kitchen Remodeling process starts with a written scope and a flat price before any work begins, because Clause 1 of the Haven Standard requires the number in writing up front.
Full Kitchen Remodeling
Signs you need it
Layout no longer works for how you cook, cabinets are delaminating or framing is out of square, and you’re planning to stay in the house another ten years.
What it costs in Danville
A full kitchen remodel in Danville runs $14,000 to $45,000 depending on cabinet line, countertop material, and how much structural work the opening reveals.
How we do it
We demo to the studs, check framing and slab condition, rough in updated electrical and plumbing, then install cabinets, counters, backsplash, and flooring in a set sequence with a photo record at each stage.
Cabinets & Countertops
Signs you need it
Cabinet boxes are water-damaged or falling out of level, and the countertop surface is dated, chipped, or cracking near seams.
What it costs in Danville
Cabinet installation runs $4,000 to $13,000 and countertop installation adds $2,000 to $6,500 in Danville, depending on whether you choose KraftMaid, Wellborn, Cambria, or Caesarstone.
How we do it
We template the counter, order to spec, remove and dispose of the old material, and install cabinets and tops as a single scope so the reveal and overhang are correct.
What Kitchen Remodeling Costs in Danville
| Item | Typical range in Danville |
|---|---|
| Full kitchen remodel | $14,000 - $45,000 |
| Small kitchen remodel | $9,000 - $20,000 |
| Cabinet installation | $4,000 - $13,000 |
How long does a Danville kitchen remodel take once permits are approved?
Most Danville kitchen remodels run 6 to 10 weeks after permits clear. Hillside or custom-framed homes can add time when structural fixes or slab repairs surface during demo. Call (470) 298-9650 for a written timeline.
Will the price change once the kitchen is opened up?
Only if a signed change order is issued. If we find framing damage or slab movement behind the drywall, we document it with photos and give you a written change order before touching it. Estimates are free.
Bathroom Remodeling in Danville
Bathroom remodeling in Danville runs $9,000 to $28,000 for a full job, with small bathrooms starting at $5,000. The 1970s-1990s homes that make up most of Danville’s stock often have water damage hiding behind fiberglass tub surrounds, especially where seasonal clay movement has shifted walls just enough to crack grout lines and let moisture behind the tile. Our Bathroom Remodeling crew waterproofs with a membrane system and puts the price in writing before demo starts.
Walk-In Showers & Shower Remodeling
Signs you need it
Grout is cracked or missing, tiles are loose, and you want to remove a tub surround in favor of a curbless or low-threshold shower.
What it costs in Danville
A walk-in shower installation in Danville ranges from $4,500 to $12,000, and a shower replacement is $3,000 to $8,500, depending on tile, glass, and waterproofing requirements.
How we do it
We remove the old surround, inspect the studs and subfloor, install a waterproof membrane and pan, then tile, grout, and set the glass and fixtures with a documented photo record.
Tub-to-Shower Conversion
Signs you need it
The tub is rarely used, always in the way, or no longer safe to step over for someone in the household.
What it costs in Danville
A tub-to-shower conversion in Danville costs $3,500 to $10,000, and the price depends on whether plumbing rough-ins need to move and what tile and glass you choose.
How we do it
We pull the tub, verify drain location and venting, adjust plumbing if the code requires it, then waterproof, tile, and install the new shower base, valve, and glass.
What Bathroom Remodeling Costs in Danville
| Item | Typical range in Danville |
|---|---|
| Full bathroom remodel | $9,000 - $28,000 |
| Small bathroom remodel | $5,000 - $12,000 |
| Walk-in shower installation | $4,500 - $12,000 |
Do Danville bathrooms need special waterproofing because of clay soil?
Yes. Clay movement shifts walls and floors enough to crack rigid tile installations. We use a flexible waterproof membrane that tolerates small movements without leaking. Call (470) 298-9650 for a written quote.
Can you handle a small bathroom without disrupting the rest of the house?
We set dust barriers and designated paths, and we work in a set sequence so the rest of the house stays usable. A small bathroom in Danville runs $5,000 to $12,000 depending on finishes.
Roofing in Danville
Roof replacement in Danville runs $8,000 to $20,000, and for homes above Camino Tassajara the job starts with a WUI code check, not a shingle count. The Town of Danville’s foothill lots require Class A roofing and ember-resistant vents, and our crews pull the permit and pass the inspection as part of the written scope.
Roof Repair
Signs you need it
You see lifted or missing shingles after Diablo wind events, water staining on ceilings, or granule buildup in gutters.
What it costs in Danville
Roof repair in Danville typically runs $400 to $1,800, and tile roof repairs run $600 to $2,500 depending on how many tiles and underlayment sections need work.
How we do it
We inspect the roof deck, replace damaged shingles or tiles, repair or replace the underlayment, and document everything with photos before and after.
Roof Replacement & Installation
Signs you need it
The roof is past its service life, shingles are curling or granule-bare, or you’re selling and a home inspector flagged the roof.
What it costs in Danville
A full roof replacement in Danville ranges from $8,000 to $20,000, and metal roofing runs $15,000 to $40,000 for the same footprint.
How we do it
We remove the old material to the deck, replace damaged sheathing, install new underlayment and the roof system, then flash, vent, and seal everything to the WUI standard if your lot requires it.
What Roofing Costs in Danville
| Item | Typical range in Danville |
|---|---|
| Roof replacement | $8,000 - $20,000 |
| Roof repair | $400 - $1,800 |
| Metal roof installation | $15,000 - $40,000 |
Does Danville require a permit to replace a roof?
Yes. Danville requires a building permit for roof replacement, and WUI zones add material and venting requirements. We pull the permit and handle the inspection as part of the written price. Call (470) 298-9650.
Can you replace a Danville roof during the summer heat?
We schedule tear-offs for early morning in July and August and follow the same sequence year-round. The heat doesn’t change the warranty, but it does change our crew’s start time. Estimates are free.
Windows & Doors in Danville
Window replacement in Danville ranges from $4,500 to $15,000, and impact window installation starts at $8,000. Homes in the hills above Camino Tassajara fall under WUI codes that often require tempered or dual-pane glass with specific frame ratings, and we specify the window to the lot, not just to the opening size. Our Windows & Doors crew carries a photo record of every removal and install so you can see what changed inside the wall.
Window Replacement
Signs you need it
Frames are warped, double-pane seals have failed and moisture sits between the glass, or you can feel air moving around closed sashes.
What it costs in Danville
Window replacement in Danville runs $4,500 to $15,000 for a typical home, depending on window count, frame material, and whether WUI glazing is required.
How we do it
We measure each opening, order to spec, remove the old unit, repair any rotted framing, install the new window with proper flashing, and seal the interior and exterior.
Impact Windows & Doors
Signs you need it
Your lot is in a WUI zone, you’re replacing aging sliding glass, or you want windows and doors that hold up to Diablo wind-driven debris.
What it costs in Danville
Impact window installation in Danville costs $8,000 to $25,000 for a full home, and doors are quoted separately by opening size and rating.
How we do it
We verify the required impact rating with the Town, order certified units, pull the old frames, and install with code-compliant anchoring and flashing.
What Windows & Doors Costs in Danville
| Item | Typical range in Danville |
|---|---|
| Window replacement | $4,500 - $15,000 |
| Impact window installation | $8,000 - $25,000 |
| Door installation | Quoted per opening |
Do WUI codes in Danville change window pricing?
Yes. Foothill lots above Camino Tassajara often require impact-rated or specific dual-pane glazing, which adds material cost over standard windows. We quote the required rating, not a generic unit. Call (470) 298-9650.
Can you match new windows to a 1980s Danville home’s style?
We match frame profile and color to the existing architecture, and we keep the install consistent with the era of the house so the replacement doesn’t stand out.
Home Additions & ADU in Danville
Home additions in Danville start at $45,000 and ADU construction runs $90,000 to $220,000, but the real cost driver on a foothill lot is the soils report. Any addition or ADU above Camino Tassajara sits on Altamont clay with a plasticity index that can exceed 40, meaning a standard slab heaves several inches within a few wet seasons; we price the engineered foundation system into the written quote instead of hoping the soil behaves. Our Home Additions & ADU process starts with that report and ends with a signed change order log showing every dollar.
ADU Design & Permitting
Signs you need it
You have a detached garage area or side yard, and you want a rentable or family unit without buying a new property.
What it costs in Danville
ADU construction in Danville runs $90,000 to $220,000, and the design and permitting phase is part of the written scope, not a separate surprise line item.
How we do it
We pull the soils report, design to the lot’s actual grade and WUI constraints, submit plans to the Town of Danville, and build only after the permit is issued.
Garage Conversion ADU
Signs you need it
The garage stores things nobody uses, and you need one more bedroom or a rental unit attached to the existing structure.
What it costs in Danville
A garage conversion ADU in Danville runs $30,000 to $80,000, depending on foundation condition, plumbing run distances, and insulation and window requirements.
How we do it
We assess the slab, frame the interior, run new electrical and plumbing, insulate to current code, and finish the unit as a permitted living space.
What Home Additions & ADU Costs in Danville
| Item | Typical range in Danville |
|---|---|
| Home addition | $45,000 - $130,000 |
| ADU construction | $90,000 - $220,000 |
| Garage conversion | $30,000 - $80,000 |
Do I need a soils report for a Danville ADU?
On any hillside or foothill lot, yes. The Altamont clay under much of Danville heaves seasonally, and the Town will not issue a permit without a foundation design that accounts for it. Call (470) 298-9650.
Will the ADU price change once excavation starts?
Only via a signed change order. If the soil report reveals conditions that weren’t in the original scope, we document it and bring you a written change order before any work proceeds.
Brands We Service in Danville
Rowan Construction Group installs and services materials from more than fifty vetted brands, including KraftMaid, Wellborn, Cambria, GAF, Owens Corning, Kohler, Belgard, and Techo-Bloc. See our brands for the full list. Most materials are ordered locally to keep lead times short.
Pricing for Construction in Danville, CA
| Service | Typical range in Danville |
|---|---|
| Kitchen remodel | $14,000 - $45,000 |
| Bathroom remodel | $9,000 - $28,000 |
| Roof replacement | $8,000 - $20,000 |
| Window replacement | $4,500 - $15,000 |
| Home addition | $45,000 - $130,000 |
| ADU construction | $90,000 - $220,000 |
| Paver driveway installation | $7,000 - $18,000 |
| Vinyl fence installation | $3,500 - $9,000 |
What pushes price up in Danville is usually the soils report and the WUI code requirements. A flat-lot price from a builder who doesn’t work the foothills won’t hold once the Town asks for an engineered foundation. Under Clause 1 of the Haven Standard, the price Rowan gives you is written out before anyone picks up a tool.
Neighborhoods We Serve in Danville
We work throughout Danville, from the downtown pre-WWII wood-frame homes to the 1970s-1990s hillside and graded lots. Our crews know which streets sit on the worst of the Altamont clay and which fall under the strictest WUI rules.
- Camino Tassajara
- Greenbrook
- Westside Danville
- Blackhawk
- Diablo
Service Area - Cities Near Danville
Rowan Construction Group coordinates dispatch from the San Francisco Bay Area office and serves Danville plus the surrounding valley communities. If you live in San Ramon, CA, Dublin, CA, Walnut Creek, CA, or Concord, CA, the same written-price process applies.
Serving Danville, CA - Our Local Coverage Area
We’re based in the Danville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Construction in Danville
Most Danville remodel permits take 3 to 8 weeks depending on scope and whether the lot is in a WUI zone. We pull permits and handle inspections as part of the written scope, and the timeline is printed in your proposal. Call (470) 298-9650 for specifics on your project.
Yes, and we treat HOA approval as a parallel approval track, not an afterthought. Many newer Danville communities, including Blackhawk (though its governance is distinct), require design review before the Town will issue a permit. We include HOA submission time in the schedule.
We serve all of Danville, including the foothill lots and the flat valley floor. Our scheduling is coordinated from the San Francisco Bay Area office, and every visit includes a documented photo record as a standard deliverable, not an upgrade.
What happens when you call
- 1A real person answersNo phone trees - talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Danville Customers Say
"Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L.