Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Driveway & Pavers Across Seaside
A paver driveway in Seaside costs $7,000 to $18,000, and a concrete driveway runs $4,500 to $12,000. Those numbers include the coastal-grade materials this specific city requires. If you live north of Canyon Del Rey or east of General Jim Moore Boulevard, your project may also carry a Fort Ord UXO clearance requirement no Monterey contractor ever deals with. Call Rowan Construction Group at (470) 298-9650 and we’ll put the number in writing before anyone picks up a shovel.
We work throughout Seaside weekly. Our crews know that a standard edge restraint on a paver driveway off Hilby Avenue corrodes within two years of salt fog, and that a concrete pour near the old Fort Ord boundary needs a vapor barrier or the rebar starts spalling in five. That’s not marketing. That’s what we see on the ground here, and it drives every quote we write for Driveway & Pavers projects in this city.
Why Rowan Construction Group Is Seaside’s Preferred Driveway & Pavers Company
Seaside is not just another stop on our route. The housing stock here is specific: modest tract homes built between 1945 and 1965 to house Fort Ord military families, with asphalt driveways poured on uncompacted fill and concrete that has absorbed fifty years of marine moisture. Our crews have torn out enough cracked aprons off Broadway Avenue and Noche Buena Street to know what’s underneath before the saw comes out.
We’ve completed paver and concrete projects in the OMC neighborhoods across the east side, in the blocks around Embassy Suites and the old CSUMB extension, and in the newer developments up against Fort Ord Dunes State Park. Each one started with a written price and a written scope under Clause 1 of our Haven Standard. When the crew leaves, you receive a documented photo record of what was found, what was removed, and what was installed.
Led by Grant Rowan, our team has run more than 4,000 projects since 2007 with one rule kept intact: no work starts on a change until the change order is signed. That discipline is why our projects finish within a few percent of the number the customer agreed to. In a city where the ground itself can complicate a simple driveway replacement, that predictability matters more than a handshake promise.
Our Driveway & Pavers Services in Seaside
Paver Driveways
We install paver driveways in Seaside using hot-dip galvanized edge restraints and polymer-sand joints sealed against salt fog. Standard steel restraints fail here within two to three years from airborne chlorides; we stopped specifying them for coastal jobs years ago. Belgard and Techo-Bloc pavers are the brands we quote most often, because their dimensional consistency lets us run tight joints that resist weed intrusion and salt crystallization. A typical Seaside paver driveway runs $7,000 to $18,000 depending on square footage, base depth, and whether parcel prep includes Fort Ord coordination.
Concrete Driveways & Concrete Work
Concrete in Seaside needs a coastal-grade mix and a vapor barrier, full stop. Fog off Monterey Bay lingers over this city every morning, and without a sub-slab vapor barrier, airborne chlorides migrate into the slab and corrode rebar from the inside. We’ve demolished concrete driveways near Ord Grove Drive that looked fine on the surface but were scaling internally after only six years. Our concrete driveways run $4,500 to $12,000, and that quote includes the barrier, the mix spec, and clean expansion joints cut the same day as the pour.
Asphalt Driveways & Resurfacing
Asphalt is common in Seaside’s older tract neighborhoods because it was fast and cheap in the 1950s. What it wasn’t was built for sixty years of salt moisture wicking up through the base. We resurface existing asphalt when the subgrade is intact and readable, and we tell you when it isn’t. If the base under your asphalt has turned to mush, resurfacing throws good money after bad, and we’ll show you the photo record proving it before recommending replacement.
Driveway Sealing
Sealing is the cheapest insurance you can buy for a driveway in Seaside, at $250 to $700 for a standard residential apron. Done right, sealing closes the surface pores that absorb marine moisture and slow-burns the structure from the top down. We use penetrating sealers rated for coastal exposure on paver, concrete, and asphalt surfaces, then document the application so you know the coverage rate and cure window.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Seaside
We quote what we trust, and in Seaside that means specifying products that survive salt exposure. Belgard and Techo-Bloc pavers are our standard for paver driveways and patios because their color bodies don’t fade under the marine layer the way budget units do inside five years. For concrete, we specify Type II and Type V cements with lower permeability and high resistance to sulfate and chloride attack. We also coordinate with prefab and ADU builders working in the city, including Abodu and Mighty Buildings, when a driveway or hardscape project overlaps a new secondary unit on the same parcel.
Common Driveway & Pavers Problems We See in Seaside Homes
These four failure modes appear on Seaside jobs more than any other city along the Monterey Bay shore, and each one traces back to the same root: salt-laden fog and the legacy of fast wartime construction.
- Edge-shift and joint blowout on paver driveways. Raw steel edge restraints corrode in season one and let the outer course of pavers drift outward. By year three, the joint sand is gone and the first two rows of pavers are loose under foot.
- Spalling and internal scaling on older concrete. Salt fog pushes airborne chlorides into unsealed slabs, and without a vapor barrier those chlorides reach the reinforcing steel. The first sign is a fine scaling on the surface around the apron edges; by the time you see it, the rebar has already started to oxidize.
- Rutting and weed lines through unsealed paver joints. Standard sand joints absorb marine moisture all winter, then the salt crystallizes as the fog burns off each morning. That cycle pushes joints out from below and leaves ruts by year five. Weeds follow the moisture track within one season.
- Base failure under 1950s and 1960s asphalt. The original contractor poured on compacted dune sand and covered it. Sixty years of fog moisture has migrated through the asphalt seams and saturated the subgrade, which is why so many driveways in the OMC and Broadway corridor sink at the garage approach and crack in a telltale spider pattern.
Pricing for Driveway & Pavers in Seaside, CA
We publish Seaside prices because this audience researches before they call. Here is the table we quote from on every driveway and paver estimate in this city.
| Service | Price Range (Seaside, CA) |
|---|---|
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
| Driveway Sealing | $250 - $700 |
These ranges cover typical residential driveways in Seaside. The coastal-spec version of the same job runs 8 to 15 percent higher than an inland quote because hot-dip galvanized restraints, marine-grade sealer, vapor barriers, and the slower-cure concrete mix each carry a real line-item cost. Choose the cheap spec in this climate and you pay for the replacement within a decade. Our estimate is a flat price with a written scope and written warranty, delivered before any work starts. Call (470) 298-9650 and we’ll schedule the free estimate.
We Also Serve Cities Near Seaside
While this page speaks to Driveway & Pavers in Seaside, our crews run hardscape and concrete projects up and down the Monterey Bay coast and inland. We work in Monterey, Salinas, Watsonville, and Hollister each month, plus the smaller unincorporated pockets between. If you’re outside Seaside proper, call and ask the office which crew runs your area this week.
Serving Seaside, CA - Our Local Coverage Area
We’re based in the Seaside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Seaside
Not always, but often. Much of Seaside sits on or adjacent to the former Fort Ord Army base, and ground-disturbing work on affected parcels triggers mandatory unexploded ordnance clearance protocols. If your property falls inside the old base footprint, typically north of Canyon Del Rey or across the east side near the OMC, we coordinate with Army Corps remediation programs and may bring a certified munitions specialist on-site before excavation. No Monterey or Carmel contractor faces this requirement; our Seaside quotes account for it when your parcel triggers it. Call (470) 298-9650 and we’ll confirm whether your parcel is inside the UXO zone before pricing.
Concrete in Seaside absorbs airborne chloride ions from the marine layer every morning. Without a vapor barrier beneath the slab, those chlorides migrate down to the reinforcing steel and start oxidation, which expands the metal and micro-fractures the surrounding concrete from the inside. The surface then scales and spalls long before a visible crack appears. This is why we spec a vapor barrier and a coastal-grade mix on every Seaside concrete pour and why the cheap inland spec fails here within a decade. For a full breakdown of your slab’s current condition, call (470) 298-9650 for a free assessment.
Three line items drive the gap: hot-dip galvanized edge restraints instead of raw steel, a polymer-sand joint system sealed against salt crystallization, and sometimes, Fort Ord UXO coordination itself. Salinas does not face persistent salt fog off Monterey Bay, so its standard specs can be lighter. In Seaside, the cheap spec fails within two to five years, not the twenty a paver driveway should last. Our written quote shows every line item so you can see exactly where the coastal upgrades sit and why they are not optional here. Our Free Second Opinion applies to paver estimates too: bring a competitor’s written quote to (470) 298-9650 and we’ll review it line by line.
Yes, if the joints have not already eroded and the edge restraints are still holding. We clean the paver surface, re-sand depleted joints with stabilized polymer sand, and apply a penetrating sealer rated for marine exposure. The job runs $250 to $700 for a standard residential driveway. If the edge restraints are rusted through or the base has shifted, sealing alone will not save it, and we will tell you that before taking your money. Call (470) 298-9650 and we’ll photograph the joints first, then quote what actually needs to be done.
Yes. The OMC parcels are converted former base housing, and ground-disturbing work there frequently hits Army Corps soil-disturbance restrictions and requires a site-specific health and safety plan before breaking ground. On a 1950s tract home off General Jim Moore Boulevard, our scope of work for a 900-square-foot paver installation included UXO coordination and a signed health and safety plan before we could pull permits. We also hit original galvanized supply lines and partial backfill from the original installation, which we documented for the homeowner before continuing. For a parcel-specific answer on your OMC property, call (470) 298-9650.
Call Rowan Construction Group at (470) 298-9650 to schedule your free estimate for a paver, concrete, or asphalt driveway in Seaside. A live person answers around the clock, and every project starts with a written price, a written scope, and a documented photo record when the crew leaves.
Written by Grant Rowan, Owner at Rowan Construction Group, operating under The Haven Standard since 2007.