Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Fresno
Fence installation in Fresno typically runs $3,500 to $9,000 for a standard residential lot, with vinyl privacy fencing landing in the $3,500-$9,000 range and aluminum ornamental fencing at $4,000-$10,000. Most Fresno jobs take two to five working days from post-setting to final walkthrough, depending on linear footage and whether we’re pulling old fence or working with fresh grade. If your existing fence is leaning, gate binding, or rotting at the soil line, call us at (470) 298-9650 and we’ll give you a written price before any work starts.
We know Fresno soil. That’s the whole ballgame here. The expansive clay under neighborhoods like Tower District, Fig Garden, and Sunnyside shrinks in July and swells in January, and a fence post set to a generic national depth will heave or lean within a few seasons. Our crews set posts for this specific ground, not for a handbook written in Ohio. When you call Rowan Construction Group, you get a crew that has pulled failed fences out of Fresno clay and knows exactly what the soil did to them.
Call (470) 298-9650 for a free written estimate. We cover every Fresno neighborhood, from Woodward Park to McLane to the West Side.
Key Takeaways
- Written price before any work starts, every time, under Clause 1 of the Haven Standard. No verbal ballparks.
- Posts engineered for expansive clay: hot-dip galvanized steel or pressure-treated rated for soil contact, set 30 inches deep minimum.
- Documented photo record of every visit, included as standard, not an upsell.
- 365-Day Done Right Promise: if it’s not right, we make it right. Printed on the page, not hidden in a footer.
- Free second opinion on any competitor’s written fence estimate. Bring it; we’ll review it line by line.
Why Rowan Construction Group Is Fresno’s Preferred Fence Installation Company
We started in 2007 and have delivered more than 4,000 projects with the same discipline: a flat written price, a written scope, and a signed change order before any deviation from the agreed number. That discipline, not charm, is why Fresno homeowners keep our number.
Our Fresno fence crews work in this soil year-round. They know the difference between a post set in the sandier ground near the San Joaquin River and one set in the dense clay of central Fresno. That’s not a credential you can advertise; it’s one you can only observe. Ask us what tends to fail on a Fig Garden fence versus a Clovis fence and you’ll get a specific answer, because we’ve pulled both out of the ground.
Every technician who walks onto a Fresno job site is background-checked and uniformed. Calls are answered by a live person 24/7, not a voicemail tree. And the photo record we hand over at the end of the job shows what we found, what we did, and what it looked like when we left. If you want to see reviews, we’ll point you to them; what we won’t do is invent a rating that we can’t produce on request.
Owner Grant Rowan set the standard in 2007 and still walks Fresno job sites. The guarantee on your fence is the same one he writes on every contract: done right, or made right, for 365 days.
Our Fence Installation Services in Fresno
We install and repair every fence type common in Fresno’s housing stock, from the post-war tract homes of central and west Fresno to the older Craftsman lots in the Tower District. Here are the four we handle most often, with the local conditions that shape each one.
Wood Fence Installation in Fresno
Redwood and cedar are the dominant wood fence materials in Fresno, and for good reason: both hold up better than untreated pine under irrigation overspray and clay soil contact. We specify pressure-treated pine posts with a rating for ground contact, or hot-dip galvanized steel posts where soil movement is a known problem. A wood privacy fence in Fresno runs $3,500-$9,000 depending on height, gate count, and whether we’re removing an old fence first. If you’re in an older neighborhood with mature landscaping near the curb, expect the irrigation overspray to be the first thing we mention at the estimate.
Chain Link Fence Installation in Fresno
Chain link is the workhorse for Fresno side yards and commercial perimeters, but it fails early here when terminal posts go in too shallow. The dry, dusty summers loosen the fabric, and a shallow post in expansive clay will kink the top rail at the line posts within two years. We set terminal posts at least 30 inches deep, often with compacted gravel backfill for drainage, which keeps the fabric taut through Fresno’s 105°F stretches and the wet winter that follows.
Vinyl Fence Installation in Fresno
Vinyl fence panels handle Fresno’s sun better than wood’s UV exposure, but only if the installer leaves expansion gaps. Central Valley heat routinely exceeds 100°F for sixty-plus consecutive days, and a vinyl panel installed tight against its post will buckle, pop seams, and bind the gate by August. Our crews cut panels with the gaps this climate requires, then set the posts with the same depth discipline we use on wood. Vinyl fence installation in Fresno runs $3,500-$9,000.
Aluminum Fence Installation in Fresno
Aluminum ornamental fencing is the right material for Fresno pool enclosures and street-facing front yards because it will not rust the way iron does under irrigation spray and it weighs less on the clay. We install aluminum fence runs at $4,000-$10,000 for a typical Fresno residential lot, with gate hardware specified for dry heat rather than coastal humidity. The powder-coated finish holds up in the Valley sun better than painted steel, which is what we recommend when a customer asks us to match an existing iron gate.
We also install Fence Installation of every other type you’ll see across Fresno: iron, privacy screens, custom gates, and commercial perimeters. The material changes; the post-depth discipline does not.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fresno
We keep our Fresno scheduling and dispatch coordinated from our Central Valley office, and we stock fasteners and hardware rated for this climate, not for a generic national spec. When a fence job calls for a specific material, we quote it by name, so the written price reflects what actually goes into the ground. That includes brands like Sakrete for concrete mixes we know hold in expansive clay, and when a Fresno homeowner wants a modern panel style, we quote Cover panels rather than a generic equivalent. If you bring us a competitor’s written estimate, we’ll review it line by line at no charge and tell you whether the hardware they specified will survive a Fresno summer.
Common Fence Installation Problems We See in Fresno Homes
We pull more failed fences out of Fresno soil than any other failure mode. Here’s what we see, in order of frequency:
- Heaving posts in expansive clay. Fresno sits on adobe-like clay that shrinks during drought and swells with irrigation cycles. A post set 18 inches deep in unamended clay will heave a full two inches out of plane after one wet winter. We set posts 30 inches deep in compacted gravel backfill, which drains water away from the base and locks the post against movement.
- Pine posts rotting at the soil line. Untreated or lightly-treated pine posts rot within five years in Fresno lawns because irrigation overspray saturates the top layer of clay, which holds moisture against the wood long after the sprinklers stop. In older neighborhoods like the Tower District, we replace these with pressure-treated ground-contact posts or hot-dip galvanized steel, and the fence stays straight for decades instead of half a decade.
- Vinyl panels buckling in summer heat. A vinyl fence installed without expansion gaps will bind its gates and pop seams during the 60-plus consecutive days above 100°F that Fresno gets every summer. We cut gaps sized for the Central Valley’s temperature swing, not a coastal spec.
- Chain-link fabric sagging from shallow terminal posts. In Fresno’s dry, dusty summers, chain-link fabric loses tension when terminal posts are not deep enough in the clay. The top rail kinks at every line post, and the fence looks tired within two years. Deep posts with gravel backfill keep the fabric taut through the worst of August.
One of the jobs we remember is a Tower District redwood privacy fence where the previous installer set 4×4 posts only 18 inches deep in unamended clay. After a wet winter, the posts heaved a full two inches out of plane. We replaced every post with hot-dip galvanized steel set 30 inches deep in compacted gravel backfill, then re-hung the original redwood pickets. The client’s gate now swings clean and the line is dead straight.
Pricing for Fence Installation in Fresno, CA
Here are the line-item ranges you’ll actually pay in Fresno, on this page, in writing, before anyone picks up a post-hole digger:
| Fence Type | Fresno Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Wood Privacy Fence | $3,500 - $9,000 |
| Chain Link Fence | $3,500 - $9,000 |
What moves the number within those ranges: linear footage, gate count and hardware, whether we’re pulling an old fence and disposing of it, and the condition of the soil at the post line. We do not give a verbal range and then revise it after digging. We give you a flat written price with a written scope and a written warranty, and no change proceeds without your signature on a change order. That’s how a Fresno fence job comes in within a few percent of the agreed number, every time.
Call (470) 298-9650 to schedule your free written estimate. We serve all of Fresno.
We Also Serve Cities Near Fresno
Our crews run fence installations and repairs in Clovis, Madera, Reedley, and Hanford, applying the same expansive-clay post engineering we use in Fence Installation in Fresno. If you’re just outside the city line, call us and we’ll tell you honestly whether the soil under your fence line behaves like Fresno clay or something easier.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Fresno
We set fence posts at least 30 inches deep in Fresno’s expansive clay, with compacted gravel backfill at the base to drain water away from the post. An 18-inch post in unamended clay will heave out of plane after one wet winter, which is the most common fence failure we repair in this city. If your existing fence is leaning, call (470) 298-9650 for an inspection and a written repair price.
Fresno requires a permit for new fences over a certain height, and the threshold varies by zone, so the honest answer is that you might. We check the city’s current requirements for your specific property at the estimate stage and tell you exactly what you need before any work starts; we don’t ask you to figure it out yourself. Under our process, the permit requirement is written into the scope, not discovered halfway through the job.
The material and labor are usually the same, but Fresno’s older neighborhoods with high clay content and mature irrigation systems often require deeper post setting, gravel backfill, and heavier ground-contact posts to prevent early rot and heaving. A Clovis lot with better-draining soil may not need that spec. We quote the fence for the soil it will actually stand in, not a regional average, which is why our Fresno price is sometimes a few hundred dollars higher for the same linear footage.
Yes, and this is a common request in Fresno’s post-war tract neighborhoods where concrete block walls from the 1960s still stand. We can set an aluminum or vinyl fence section adjacent to the block wall, matching the height and sight line, and we’ll specify the post depth and hardware for the clay soil under both. Bring us a photo and we’ll give you a written price before we touch the wall.
We build gate frames with diagonal bracing, galvanized or stainless hardware rated for dry heat, and adjust the hinges at installation, not after the first summer. Fresno’s low humidity and 100°F-plus stretches dry wood unevenly, which is what warps a gate that relied on the pickets alone for structure. We also set the gate posts deeper than the line posts, because a gate concentrates load at two points. If your gate already sags, call (470) 298-9650; gate repair is a small job we do constantly in Fresno.
Get Your Free Written Fence Estimate in Fresno
Before you sign anything, get the number in writing. Our process starts with a site visit, a soil look at the post line, and a flat written price that covers the entire fence: materials named, gate hardware specified, post depth stated, and a written warranty on the work. If you have a competitor’s quote, bring it; we’ll review it line by line at no charge. Call (470) 298-9650 to schedule your free written estimate today, or ask for Grant Rowan by name and he’ll walk the job with you.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Fresno since 2007.