Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Inglewood
A new fence in Inglewood typically runs $3,500 to $9,000 for vinyl, and $3,000 to $11,000 for a standard 6-foot wood fence with labor and materials. Most installations take one to three days once permits clear. We work in Inglewood weekly, from Morningside Park to North Inglewood to the streets fanning out from Market Street. If you’re planning a fence near the LAX flight corridors, call (470) 298-9650. There’s an airspace consideration here that most contractors never check, and it can stop a job cold.
Why Rowan Construction Group Is Inglewood’s Preferred Fence Installation Company
We’ve built enough fences in Inglewood to know what the marine layer does to fasteners. The air here carries more moisture than most people expect, sitting just five miles from the Pacific. Galvanized hardware rusts faster. Cedar weathers differently. A contractor who learned the trade in the San Gabriel Valley won’t catch these things until the panels start sagging. We do.
Rowan Construction Group has been putting written prices in front of customers since 2007, funded by Grant Rowan, with more than 4,000 projects delivered under The Haven Standard. Customers in Inglewood get the same flat written price, the same written scope, and the same documented photo record on every visit that we deliver on every job, in every trade we run. Under Clause 1, the price is written before anyone starts. That’s the whole point of how we work, and it applies whether we’re building a fence on a 1940s bungalow lot in Morningside Park or a long side-yard run off Crenshaw Boulevard.
Our crews are background-checked and uniformed. A live person answers our calls 24/7, not a voicemail tree. And our 365-Day Done Right Promise means if the fence isn’t done right, we make it right. The guarantee is printed on every page and backed by a terms page, not an asterisk.
We know the difference between a straightforward over-the-counter fence permit in Inglewood and a job that pulls in an FAA review because the line sits under a Part 77 obstruction surface. That local knowledge shows up in the written quote before we ever dig a post hole. Call (470) 298-9650 and we’ll walk you through what your specific fence line actually requires.
Our Fence Installation Services in Inglewood
Our Fence Installation team handles the full range of residential fencing in Inglewood. Here’s what we’re building most weeks, and what matters for each material here specifically.
Privacy Fence
Privacy fences dominate Inglewood’s post-war neighborhoods, where homes sit close together and aircraft noise from LAX is a real factor. We build 6-foot and 8-foot redwood and cedar privacy fences across the city, and on busy streets we often recommend a sound-dampening design, denser board spacing, staggered pickets, or an added mass layer. On a 1940s stucco ranch in Morningside Park, we scoped a privacy fence where the owner wanted 8-foot panels specifically to cut aircraft noise. A quick Part 77 check showed the planned line stayed below the obstruction surface, so we only needed an over-the-counter permit. But our scope of work included a note confirming no crane or boom lift would be used. That piece of paper avoided an FAA filing and kept the draw schedule on track.
Aluminum Fence Installation
Aluminum holds up better than steel in Inglewood’s coastal air, it won’t rust the way iron will within a few years here. We install aluminum fence in two common patterns in Inglewood: full panels for homeowners who want a boundary without blocking sightlines, and pool-code fencing around newer backyard pools, where Inglewood’s code requires a self-latching gate and a specific height. Aluminum fence installation in Inglewood runs $4,000 to $10,000 for a typical residential perimeter. It’s lighter than iron, but the posts still get set in concrete, and the racking still gets adjusted to follow grade. We do both correctly.
Wood Fence
Most Inglewood lots built between 1940 and 1970 were originally fenced in redwood or Douglas fir, and a lot of those fences are on their third or fourth life by now. We replace them with new redwood or pressure-treated pine, with 4×4 posts set in concrete below the frost line and hardware that’s rated for marine air. A standard 6-foot wood fence in Inglewood, labor and materials, runs $3,000 to $11,000 depending on the linear footage and whether the old posts are still sound enough to reuse. We always check the old post footings before we quote. Rotten posts from Inglewood’s damp summer marine layer are the single most common reason an old fence has to be fully demoed instead of just re-boarded.
Fence Gates
Gates get more calls from Inglewood than nearly any other fence component. Side gates sag on 60-year-old hinges. Driveway gates, especially with automatic openers, need a separate permit in Inglewood when they’re motorized, and the control wiring needs a dedicated circuit. We build and rebuild both, and we handle the permit paperwork as part of the written scope. If you’ve got an old manual gate on a North Inglewood driveway that no longer closes square, we can usually rebuild it in a day once parts are on site.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Inglewood
We work with materials from manufacturers who build for this climate. You’ll see ActiveYards aluminum and vinyl, Ply Gem fencing products, and redwood graded at Clear Heart or Construction Heart from Northern California mills. We stock common residential components locally so an Inglewood repair doesn’t wait on a slow freight truck from the East Coast. For custom gates and architectural runs, we can source from fabricators who work on multi-family and light commercial projects across the LA basin. The brands matter because they’re what let us give you an honest number in writing, not an inflated one with a contingency baked in.
Common Fence Installation Problems We See in Inglewood Homes
- Fastener rust from the marine layer. Inglewood sits under persistent coastal moisture, and cheap zinc hardware rusts out years early. We spec stainless or hot-dip galvanized fasteners on every fence we build here, and we note it in the written scope so you can verify it later.
- FAA Part 77 surprises near LAX. A temporary boom lift or a fence line that intrudes into protected airspace can trigger a Form 7460-1 obstruction study, adding weeks and money. We check the Part 77 surface before we quote, especially on lots north of Century Boulevard.
- Old easements and incorrect boundary lines. Many Inglewood lots have been fenced on the wrong line for decades. We recommend a survey if there’s any doubt about your property corners, and we don’t set posts across an easement without one. On larger lots that still have septic, a fence across a setback can trigger a county-side stop-work order.
- Soft-story apartment fence conflicts. Inglewood’s older apartment buildings often carry mandatory seismic retrofit work, and a fence line that blocks the retrofit contractor’s access or runs across a recorded utility easement becomes a conflict. We coordinate with property managers to keep the fence out of the retrofit path.
Pricing for Fence Installation in Inglewood, CA
A typical fence install in Inglewood falls between $3,500 and $9,000. Wood runs $3,000 to $11,000, aluminum $4,000 to $10,000, and a privacy fence with sound-dampening design runs $5,000 to $14,000. What moves the number: linear footage, old post removal, gate count and hardware, whether the ground is sandy loam near the beach or compacted clay, and whether the fence line needs a Part 77 review. Every quote you get from us is a flat written price with a written scope. No change order starts without your signature.
| Service | Price Range (Inglewood) |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Wood Fence (labor and materials, typical 6-ft) | $3,000 - $11,000 |
| Privacy Fence with sound-dampening design | $5,000 - $14,000 |
Call (470) 298-9650 for a free written estimate. Bring a competitor’s quote and we’ll review it line by line at no charge.
We Also Serve Cities Near Inglewood
In addition to Fence Installation in Inglewood, our crews regularly run fence jobs in Hawthorne, Culver City, Lawndale, and Manhattan Beach. If you’re just over the city line and wondering whether the same rules apply, call us. The marine layer does, and the LAX airspace does, but the permitting doesn’t always. We check all of it before we quote.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Inglewood
Yes. Any fence or temporary structure, including a boom lift used to install panels, that intrudes into FAA Part 77 airspace near LAX’s flight corridors can require a Form 7460-1 obstruction study. We check your fence line against the Part 77 surface before we quote, and we document the result in your written scope, one way or the other. Call (470) 298-9650 and we’ll check your specific property.
Inglewood’s coastal air carries enough moisture to rust standard steel fasteners years earlier than they’d fail inland. That means aluminum over iron, stainless or hot-dip galvanized hardware on wood, and anodized finishes on any metal that touches the ground. We specify these materials by default on every fence we build in Inglewood.
If the line crosses a recorded easement or intrudes on a septic setback, the jurisdiction can issue a stop-work order, especially on larger county-side lots. We pull the property record and recommend a survey before quoting. We’ve seen fences demo’d over this. It’s a $600 survey that saves a $4,000 mistake.
Yes. Motorized driveway gates require their own permit in Inglewood, and the opener circuit needs a dedicated electrical run. We handle the permit, the wiring, and the UL 325 safety sensors as part of the written scope. A manual gate usually doesn’t need a separate permit, but we verify either way.
The biggest surprise is an FAA violation over a boom lift or a fence line that pokes into Part 77 airspace. An out-of-area crew erects a temporary lift, the FAA flags it, and the job halts until an obstruction study clears it. The fix adds weeks. We check for this on every Inglewood job before we ever set a post. Call (470) 298-9650 for a free estimate and we’ll explain what your specific fence line requires.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Inglewood with written fence pricing since 2007.