Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across North Hollywood
Fence installation in North Hollywood typically costs $3,500-$9,000 for a standard residential run, with vinyl and aluminum landing at the higher end of that range. Most North Hollywood projects take 1-3 days once posts are set, depending on linear footage and access. Call Rowan Construction Group at (470) 298-9650 for a written price before any work starts, not a ballpark over the phone.
We know North Hollywood because we work here every week. The Valley heat, the 1960s soft-story apartment stock along Lankershim, the post-war stucco bungalows south of Burbank Boulevard. Those conditions dictate which fence materials survive and which fail inside a decade. Our North Hollywood crews set posts deeper than the Department of Building and Safety minimum because dry, expansive clay soil here moves more than most people think. That one decision adds a few hundred dollars to a project and ten years to the fence’s life.
Why Rowan Construction Group Is North Hollywood’s Preferred Fence Installation Company
Rowan Construction Group has delivered over 4,000 projects since 2007, every single one with a documented written price before a tool was picked up. That discipline comes from our Haven Standard, and Clause 1 is the whole point: the price is written down, in dollars, with a written scope and a written warranty attached. Residents in the 91601 and 91605 zip codes who research contractors the way they research appliances respond to that. They want the number on the page, a screenshot they can compare. That is what we give them.
Our North Hollywood customers also get a documented photo record on every visit, included as standard, not an upgrade. When our crew finishes a fence replacement, you leave with photographs of every post footing, every gate hinge, every section of rail. If the stucco at a gate connection showed old earthquake micro-cracks, that is in the record. If a post hit an old irrigation line, that is in the record too. Grant Rowan built the company on the belief that evidence beats enthusiasm.
The 365-Day Done Right Promise applies to every fence we install in North Hollywood. If something is not done right, we make it right. That promise is printed and backed by a terms page, not an asterisk.
Our Fence Installation Services in North Hollywood
Aluminum Fence
Aluminum fence installation in North Hollywood runs $4,000-$10,000 depending on linear feet, panel height, and gate count. This is the material we recommend most often for properties near the Lankershim and Vineland corridors, but only when it is specified correctly. Standard powder-coated aluminum fence rails break down within a decade under direct Valley UV exposure, especially on south-facing runs. We specify a marine-grade finish and stainless steel hardware, which adds roughly 10-15% to the material cost and buys you two to three times the service life. For a North Hollywood property, that is not an upgrade. It is the baseline spec.
Privacy Fence
Privacy fencing is the most requested Fence Installation option in North Hollywood, particularly on the 1940s-1960s bungalow lots between Magnolia and Chandler. Homeowners near Lankershim Boulevard want a fence that cuts traffic noise and blocks sightlines from the apartment corridors. A 6-foot vinyl privacy panel with tightly butted pickets and sealed top rails reduces road noise measurably more than a shadowbox wood fence. We price vinyl privacy fence at $3,500-$9,000 for a typical North Hollywood lot, including the deeper footings the soil here requires.
Fence Gates
Gate failures are the most common fence repair call in North Hollywood, and they usually come from one of two causes. On soft-story apartment properties with tuck-under parking, gate frames get pulled off 1960s stucco walls when the post anchors were never bolted into shear-resistant framing. On single-family lots, gates sag because the hinge post was set too shallow in North Hollywood’s expansive clay. We set gate posts in 24-inch concrete footings with hot-dip galvanized post anchors, and we use stainless steel hinges instead of zinc-plated. The price difference is about $40 per gate. The repair difference is five years versus fifteen.
Wood Fence
Wood fence remains popular in North Hollywood for a very specific reason: the Valley’s mid-century ranch aesthetic. We install cedar and pressure-treated pine with one critical change from mid-century practice. Untreated pine posts set directly in North Hollywood soil crack or heave within 5-7 years. We set pressure-treated posts in concrete footings that extend below the expansion zone. When we replaced a 1960s redwood fence on a Lankershim corridor property with tuck-under parking, the original posts had rotted at the soil line and the gate frame was pulling away from the stucco wall. We set new pressure-treated posts in 24-inch concrete footings with hot-dip galvanized post anchors, then used stainless steel gate hinges and a marine-grade vinyl privacy panel. No change order was needed because the scope of work listed the seismic-compliant gate post depth before permit review.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We source from over fifty vetted material brands, and for North Hollywood we lean on Sakrete for concrete and fast-set post mixes, plus Cover for prefabricated privacy panels when speed matters on apartment corridor jobs. Our Los Angeles office coordinates dispatch and scheduling, so North Hollywood customers see same-week availability on most material orders. If a specific panel or gate kit is backordered, we tell you before you sign, and the written scope states the substitution policy. No surprises after the fact.
Common Fence Installation Problems We See in North Hollywood Homes
- Shallow post footings in expansive clay. North Hollywood’s dry, dense soil expands and contracts with temperature swings from summer highs of 100-108°F to winter lows. A post set at the old 18-inch standard will lean within a few years. We go 24 inches minimum on every gate and corner post.
- Powder-coated aluminum rails degrading on south-facing runs. The Valley gets far more direct UV than coastal LA. Thinner powder-coat finishes on aluminum fencing chalk and corrode within a decade. We specify marine-grade finishes on every North Hollywood aluminum fence, at a cost we itemize in the written quote.
- Chain-link tension bars snapping under thermal expansion. On 100°F-plus days, steel expands. Tension bars with zinc-plated hardware snap at the threaded ends under repeated thermal cycling, leaving sagging sections. We use stainless steel hardware on chain-link fence in North Hollywood.
- Gate posts pulling away from soft-story apartment stucco walls. Many 1960s apartment buildings have stucco over wood framing that never got post-1994 retrofit work. A gate bracket bolted only into stucco will fail. We anchor into shear-rated framing or install a freestanding post with a continuous concrete footer.
Pricing for Fence Installation in North Hollywood, CA
A vinyl fence installation in North Hollywood runs $3,500-$9,000. An aluminum fence installation runs $4,000-$10,000. These ranges reflect local material costs, the deeper footings our soil requires, and the seismic-compliance details on soft-story apartment properties. Here is the line-item breakdown:
| Material | North Hollywood Price Range | What Affects the Price |
|---|---|---|
| Vinyl Fence Installation | $3,500-$9,000 | Linear feet, panel height, gate count, footing depth, soil conditions |
| Aluminum Fence Installation | $4,000-$10,000 | Marine-grade finish, stainless hardware, gate weight, post anchoring |
The price gap between a coastal-spec fence and a standard inland-spec version is real. On a 150-foot aluminum fence, the marine-grade finish and stainless hardware add roughly $1,200-$1,800. The inland-spec version will need panel replacement or re-coating within 8-10 years under North Hollywood sun. The coastal-spec version is the fence we would install on our own property here. Call (470) 298-9650 for a written quote, and ask us to show you the hardware difference in person. We will bring both samples.
We Also Serve Cities Near North Hollywood
Rowan Construction Group serves Fence Installation in North Hollywood and the surrounding Valley cities including Studio City, Universal City, Van Nuys, and Burbank. The soil and heat conditions shift from one city to the next, so our fence specifications shift with them. A Burbank fence on a shaded lot does not always need the same marine-grade aluminum finish we specify for a south-facing North Hollywood run. Ask us why. We will explain the difference with photographs from previous jobs.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in North Hollywood
Yes. Replacing a fence on a soft-story apartment property in North Hollywood requires a permit when the fence is over 3.5 feet high or when gate posts are attached to the building structure. The Department of Building and Safety also requires compliance with the seismic retrofit ordinance if the gate anchorage touches a soft-story wall. We pull the permit, and the written scope includes permit costs. No change order appears because the permit assumption was already in the contract. Call (470) 298-9650 if you want to see how our scopes handle this before you sign.
North Hollywood’s landlocked Valley location means dry, expansive clay soil that holds water longer at the soil line during winter irrigation, then bakes hard in 100°F-plus summer heat. That cycle promotes both fungal decay and mechanical cracking at the post base, while Burbank’s more moderate microclimate and better-draining sandy soils put less stress on posts. We set North Hollywood posts in concrete footings that extend below the expansion zone, with the top of the footing sloped to shed water away from the post.
A coastal-spec aluminum fence with marine-grade coating and stainless steel hardware runs about $1,200-$1,800 more on a 150-foot run than the standard inland-spec powder-coat version. The standard version will show chalk and rail corrosion within 8-10 years under North Hollywood UV. The coastal-spec version is what we specify for any property south of Burbank Boulevard when the fence faces the Lankershim or Vineland corridors. Call (470) 298-9650 for an exact line-item comparison on your property dimensions.
We locate the wall’s framing with a stud finder and IR scan, then anchor the gate bracket into shear-rated studs with epoxy-set bolts, not into the stucco itself. The stucco around the bracket gets a relief cut to prevent stress transfer into existing micro-cracks. If the framing is not shear-rated for the gate’s weight, we install a freestanding gate post with a continuous concrete footer so no load reaches the wall at all. On Lankershim corridor buildings with unreinforced stucco, the freestanding post is usually the right call, and it costs less than a structural wall retrofit.
Yes. A solid 6-foot vinyl privacy fence with tightly butted pickets and sealed top rails reduces traffic noise by 10-15 dBA at the property line, which is the difference between conversation-level and raised-voice-level noise on a summer evening. A shadowbox wood fence with gaps between pickets reduces far less. If noise is the main reason you are fencing, we specify the vinyl panel in the written quote, not as an upgrade pitch after the fact.
Get Your Written Price Before Anyone Picks Up a Tool
Fence installation in North Hollywood is a decision about materials, soil, and heat, not a guess. We put the price in writing with the scope, the hardware spec, the footing depth, and the warranty all itemized. Bring us a competitor’s quote and we will review it line by line at no charge under our Free Second Opinion on Any Written Estimate policy.
Call Rowan Construction Group at (470) 298-9650 to schedule your free estimate. A live person answers. We will send a uniformed, background-checked technician to your North Hollywood property, take measurements, and deliver a written quote with a documented photo record. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order.
Written by Grant Rowan, Owner at Rowan Construction Group, operating under The Haven Standard since 2007.