Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Temecula
Fence installation in Temecula runs $3,500-$9,000 for most residential projects, with vinyl and aluminum on the higher end and wood privacy fencing falling mid-range. That price is written before anyone picks up a posthole digger. If you’re on a hillside lot off Rancho California Road or De Luz Road, your number will be different, and we’ll explain exactly why before you sign anything. Call (470) 298-9650 and we’ll walk the property, measure the run, and hand you a flat price with the scope in writing.
This page exists because Temecula is not Murrieta, and it’s certainly not Fallbrook. The valley floor is tract-home country. The western hills are fire-hazard terrain with fault lines running through them. A fence contractor who treats both the same way will cost you weeks and a pile of change orders. Our Fence Installation team has built across both, and we quote accordingly.
Why Rowan Construction Group Is Temecula’s Preferred Fence Installation Company
Rowan Construction Group has operated since 2007, and our crews have spent the years since learning what Temecula’s lots actually do when you dig into them. The stucco tract homes in Redhawk and Paloma del Sol sit on graded pads with predictable soil. The five-acre parcels up in De Luz sit on decomposed granite over fractured rock, with slope conditions that change the post-depth math. We do not bid those two jobs the same way.
Every fence project we run in Temecula starts with the same discipline: a written price before work starts, no exceptions. That’s Clause 1 of The Haven Standard, the operating system we’ve built the company on. When you call, a live person answers, not a voicemail tree. When the crew arrives, they’re background-checked and uniformed. When they leave, you get a documented photo record of what was found and what was done. No asterisks.
Haven’t decided yet? Bring us a competitor’s written estimate and we’ll review it line by line at no charge. If their number works and ours doesn’t, we’ll tell you that too. Grant Rowan, our owner, built the company on the idea that a contractor who shows his work wins the job. He’s still right.
Our Fence Installation Services in Temecula

Wood Fence
Western red cedar and pressure-treated pine hold up reasonably well in Temecula’s dry heat, but the Santa Ana winds will find every weak post connection. We set 6×6 pressure-treated posts in concrete at minimum 30-inch depth for a 6-foot privacy fence, deeper on slope. In the Redhawk and Harveston communities, we match the existing fence line and height so the HOA doesn’t come back at you.

Chain Link Fence
Chain link is the practical choice for acreage up De Luz Road or along the Rancho California corridor, especially where you’re fencing pasture or keeping horses off the road. Galvanized posts and 9-gauge wire are the spec we write for high-wind conditions. On hillside lots we add extra top rail support and brace corners with diagonal tension bars.

Vinyl Fence
Vinyl fence installation in Temecula runs $3,500-$9,000 for a typical residential run. It’s popular in Paloma del Sol and Morgan Hill because it doesn’t need staining and won’t check or split the way wood does after five summers of 100°F heat. We use solid-rout vinyl panels with aluminum-reinforced bottom rails on windy exposures. Cheaper hollow panels flex and pop in a Santa Ana.

Aluminum Fence
Aluminum fence installation in Temecula runs $4,000-$10,000. For pool code compliance, Temecula requires a minimum 60-inch height and self-closing, self-latching gates. We install powder-coated aluminum with the latch hardware already certified, and we pull the permit so the inspection is clean the first time. On wine-country parcels we run aluminum for the front entry and ranch fencing for the rest.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands & Materials We Detail in Temecula
We specify what we can stand behind. On Temecula jobs, that means vinyl from proven manufacturers with solid-rout panel construction, aluminum with a 20-year powder-coat warranty, and pressure-treated or cedar posts rated for ground contact. We’ve installed products from brands like Mighty Buildings and Cover on accessory projects. The point isn’t the brand name on a spec sheet. It’s that the material holds up in this specific valley, with this heat and this wind, and that we can hand you the cut sheet before you buy.
Common Fence Installation Problems We See in Temecula Homes

- Fault-zone surprises: The Elsinore Fault Zone runs through parts of the Temecula Valley. On certain parcels, Riverside County requires an Alquist-Priolo geotech review before a fence permit is issued. We’ve seen owners lose six weeks because a contractor set posts first and asked questions later.
- Fire-zone detailing: Western wine-country parcels sit inside high fire-hazard severity zones. Standard wood fencing with a combustible top rail can fail county final inspection. The fix is ember-resistant detailing: non-combustible post caps, metal connectors, and vertical clearance from grade as specified in the check sheet.
- Hillside access drama: De Luz Road and the western hills have narrow, winding access with no room for a 40-foot delivery truck to turn around. We stage materials at the nearest flat turnout and shuttle with a smaller rig. If your contractor doesn’t plan for that, the change order shows up halfway through.
- Septic and well setbacks: On acreage without sewer, Riverside County enforces minimum offsets from septic leach fields and wellheads. Fencing too close fails inspection and, worse, a posthole machine through a leach line is a five-figure repair. We locate and flag those offsets before quoting.
Pricing for Fence Installation in Temecula, CA
Here are the numbers we write on estimates for Temecula homeowners.
| Fence Type | Typical Temecula Price Range |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
| Wood Privacy Fence (6 ft, sealed) | $3,800-$8,500 |
| Chain Link (galvanized, 4 ft) | $1,800-$4,500 |
Hillside lots change these numbers. Longer material hauls, deeper post holes through rock, fire-zone detailing, and geotech review all add cost. We show you that math in the written estimate, line by line. No work proceeds on a change until you’ve signed the change order, which is why our jobs finish within a few percent of the number you agreed to. Call (470) 298-9650 and we’ll walk the property and hand you a flat price.
We Also Serve Cities Near Temecula

We work across the Temecula Valley and the surrounding Inland Empire, including Temecula and the neighboring communities of Murrieta, Fallbrook, Wildomar, and Menifee. Hillside permitting rules differ by jurisdiction, so we scope each job against the local code. If you’re on a county lot in wine country, the process is different than a tract home in Murrieta, and we’ll tell you which one applies before the first post is set.
Serving Temecula, CA - Our Local Coverage Area
We’re based in the Temecula area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Temecula

Yes, in most cases. Riverside County issues the permit, not the city, for properties in the unincorporated wine-country corridor, and hillside lots in high fire-hazard zones or within the Alquist-Priolo fault zone trigger additional review. We handle the permit application and geotech coordination as part of the written scope. Call (470) 298-9650 and we’ll tell you exactly what your parcel needs before we quote it.
Setbacks from septic leach fields and wellheads are enforced by Riverside County, and they can push your fence line several feet inside where you’d naturally put it. On steep slopes, the retaining wall and drainage plan may also come into play. We locate the septic, well, and property corners first, then draw the fence line around them so the permit clears the first time. Estimates are free.
Get the geotech report noted in the scope, the fire-zone detailing specified (non-combustible caps, metal post connectors, clearances), the septic and well offsets drawn on the site plan, and a written change-order process that requires your signature before any added cost. Our contracts include all of that. The written price is what you pay unless you sign a change order.
Sometimes, but not always. In high fire-hazard severity zones, the county will not sign off on standard combustible wood fencing unless it includes ember-resistant detailing. In the flat valley tract communities, standard wood privacy fencing is generally fine. We’ll check your parcel’s zone and tell you the answer before we write the estimate. Call (470) 298-9650 for a free on-site look.
Because the Elsinore Fault Zone runs through parts of the Temecula Valley, and state law requires a geotechnical review and a mandatory 50-foot setback from the mapped fault trace before any structure, including a fence, is permitted on an affected parcel. We’ve coordinated that review on properties off Rancho California Road. The earlier it’s flagged, the less it costs you in delays.
Contact Us for Fence Installation in Temecula
If you’re planning a fence on a Temecula lot, whether it’s a privacy fence in Harveston, vinyl in Paloma del Sol, or ranch fencing off De Luz Road, start with a written price. Call (470) 298-9650 to schedule a free estimate. One of our team will walk the property, answer your questions in plain terms, and hand you a flat number with the scope in writing. No pressure, no phone games, no change orders without your signature.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Temecula and the Inland Empire since 2007.







Before
After
Before
After