Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Woodland Hills
Fence installation in Woodland Hills, CA typically runs $3,500 to $9,000 depending on your material, linear footage, and whether your property sits on the flat Valley floor or climbs into the Santa Monica Mountains. We serve every corner of the neighborhood, from Warner Center east of Topanga Canyon Boulevard to the chaparral-lined lots along Mulholland Drive. Our team at Fence Installation works from a written scope and a written price every single time, no exceptions. Call (470) 298-9650 and you’ll get a line-item quote before anyone touches a post hole.
Why Rowan Construction Group Is Woodland Hills’s Preferred Fence Installation Company
We’ve worked in Woodland Hills long enough to know the difference between a lot off Burbank Boulevard and one off old Topanga Canyon Road: soil, slope, setback, and fire code all change by half a mile. Our crews hold current LADBS permits knowledge for the Chapter 7A fire zones that most Woodland Hills hillside parcels fall into. That matters because a fence inspector’s correction order for a non-ember-resistant detail costs re-inspection fees and weeks of delay. We get sign-off the first time, backed by the 365-Day Done Right Promise: if something isn’t done right, we make it right, under The Haven Standard.
Grant Rowan founded this company in 2007 on a single discipline: the number goes in writing before the work starts. That’s Clause 1 of the Haven Standard, and it applies to every fence quote we issue in Woodland Hills. Over 4,000 projects later, our projects still finish within a few percent of the agreed price. No change proceeds without a signed change order. Every visit includes a documented photo record, so you see exactly what we found and what we did. Crews are background-checked and uniformed. A live person answers our phones 24/7.
Our Fence Installation Services in Woodland Hills

Wood Fence
In Woodland Hills, a wood fence means two different things depending on your elevation. On a Valley floor ranch lot near Canoga Avenue or De Soto, a cedar privacy fence is standard, with posts set below the frost line and concrete footings sized for the loose, sandy soil common to the old alluvial fans. Calls for wood fences on hillside parcels above Ventura Boulevard get a different spec: Chapter 7A ignition-resistant materials if the fence sits within 10 feet of a structure. We write the scope accordingly, so the LADBS fire-rebuild inspector never flags it.

Chain Link Fence
For homeowners who need a functional boundary, chain link remains the lowest-cost path in Woodland Hills. We use galvanized steel posts and treated rails that hold their tension in Santa Ana wind events, which blow aggressively through the gaps in the Santa Monica Mountains and hit this neighborhood harder than most. We also handle chain link for pool code compliance, where LA County requires specific height and gate latches. The written quote includes every section, fitting, and post, so there’s no “material changed when we got there” conversation.

Vinyl Fence
Vinyl fence installation in Woodland Hills typically runs $3,500 to $9,000 for a standard 80 to 100 linear-foot perimeter. Vinyl works well on the flat lots of Woodland Hills because it doesn’t warp, splinter, or need restaining in heat that regularly reaches 110°F in summer. But on hillside grades above roughly 20 percent, standard vinyl panel racking binds. We specify step-railed vinyl sections instead, and the quote reflects that. If you bring a competitor’s written estimate, we’ll review it line by line at no charge.

Aluminum Fence
Aluminum is the fastest-growing material in the Woodland Hills hillsides because it meets Chapter 7A ignition-resistant standards without the maintenance of iron or the fire risk of composite and wood. On a hillside lot off Mulholland Drive, we replaced a 1970s cedar fence that had become a fire hazard: warped, cracked, and sloped with grade so badly the old posts were leaning into the neighbor’s pad. We pulled permits through the LADBS fire-rebuild pathway, wrote the scope with a clear allowance for any post rot found at rough-in, and swapped to an aluminum fence with ember-resistant venting details where it met the house. The inspector flagged nothing on the final walk, and the homeowner got sign-off the first time.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Woodland Hills
We work across fifty-plus vetted material brands, including Abodu and Mighty Buildings for modular and pre-approved accessory structures where fencing needs to integrate with a permitted ADU or pool enclosure. Because Woodland Hills sits partially within the Very High Fire Hazard Severity Zone, we stock and specify systems that a flatland supplier will not offer: ICC 315-rated ember-resistant vents, noncombustible post caps, and aluminum gates rated for fire-path setbacks. Sourcing depth across fifty-plus brands keeps our written quotes honest because we’re not padding the line items to cover distribution markups.
Common Fence Installation Problems We See in Woodland Hills Homes

- Floating posts in sandy Valley floor soil. The old alluvial deposits under the Warner Center and Platt Village areas mean standard post depth is not enough. We analyze soil at the time of the quote and spec deeper footings or helical anchors where needed. One rainy season is all it takes to lean a 6-foot privacy fence that was set shallow.
- Chapter 7A fire-zone compliance gaps. A fence that encloses a hillside structure but uses standard non-ember-resistant vents triggers a correction order and a re-inspection fee during the LADBS fire-rebuild inspection. We see this on roughly a third of the estimates we review from other contractors in this neighborhood.
- Grade change binding between Woodland Hills sections. Homes along Valley Circle Boulevard or Dumetz Road often sit on infill with sudden elevation shifts. We pre-cut step-rail transitions for vinyl and adjust aluminum panel heights so gates swing freely and the fence line stays clean across the grade.
- Over-sloped hillside posts loosened by Santa Ana wind. Fall and winter wind in Woodland Hills funnels through gaps in the Santa Monica Mountains and hits rigid panels from the side. Posts need deeper embedment and reinforced post-to-rail connections to hold. We spec wind-rated attachment hardware for every hillside fence, not just a standard bracket set.
Pricing for Fence Installation in Woodland Hills, CA
Lead pricing for fence installation in Woodland Hills ranges from $3,500 to $9,000 for a standard perimeter. Aluminum fence installation typically runs $4,000 to $10,000, and vinyl fence installation typically runs $3,500 to $9,000. The exact number depends on your linear footage, post depth spec for your soil, whether your parcel sits inside the Very High Fire Hazard Severity Zone, and how much grade your line crosses. A level Warner Center lot with 90 linear feet of vinyl will be toward the lower end. A 1,200-square-foot hillside yard that climbs 30 percent with Chapter 7A compliance will be toward the upper end. What you won’t see is a change order that wasn’t signed first. Call (470) 298-9650 to schedule your free estimate.
| Service | Price Range in Woodland Hills |
|---|---|
| Aluminum Fence Installation | $4,000-$10,000 |
| Vinyl Fence Installation | $3,500-$9,000 |
| Fence Repair | $250-$1,200 |
| Fence Gates | $600-$2,500 |
Fence repair in Woodland Hills starts around $250 for a single post reset on flat ground and runs to $1,200 for a gate replacement with new hinges, latch, and frame reinforcement. If your existing fence has rotted posts but sound pickets, we can often save the pickets and replace only the post framework. We write that as a distinct scope so you’re not paying for new material you don’t need. Under Clause 1 of the Haven Standard, the written price is delivered before any work starts, every time.
We Also Serve Cities Near Woodland Hills

From our Los Angeles office, we run crews into Canoga Park, West Hills, Encino, and Northridge every week. If you’re in one of those neighborhoods, the same pricing discipline and Chapter 7A knowledge apply. See our Fence Installation in Woodland Hills service area details. Dispatch and scheduling are coordinated from the Los Angeles office, with local Woodland Hills crews doing the on-site work.
Serving Woodland Hills, CA - Our Local Coverage Area
We’re based in the Woodland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Woodland Hills

Yes. Any fence within 10 feet of a structure or on a hillside parcel inside the Very High Fire Hazard Severity Zone must comply with Chapter 7A ignition-resistant standards. That means noncombustible or ignition-resistant materials, ember-resistant venting, and post details that a standard flatland fence never requires. We handle this in the permitting phase so the LADBS fire-rebuild inspector never flags it. Call (470) 298-9650 for an exact quote; estimates are free.
We spec step-rail construction, which breaks the fence into level sections that follow the grade in steps rather than a single racked panel that binds. Post embedment depth is calculated for the slope angle and the loose sandy soil common to the Valley floor’s alluvial deposits, plus deeper footings and helical anchors where the grade steepens. We write the step count and post spec into the contract. Call (470) 298-9650 to schedule your free estimate.
If the aluminum fence is within 10 feet of a structure and inside the VHFHSZ, yes. The inspector will check for ICC 315-rated ember-resistant vents on any enclosed portion that touches the structure perimeter. We spec these vents in the written scope and show the compliance documentation on the final walk. Call (470) 298-9650 and we’ll review your specific parcel with you.
We can often replace only the posts, reinforcing with deeper concrete footings and post-base anchors while reusing the existing pickets. On hillside lots where the old posts leaned into the neighbor’s pad, we’ll re-set the line and add wind-rated post-to-rail connections. The written quote separates post replacement from full picket replacement so pay for only what gets done. Call (470) 298-9650 for exact pricing.
Yes. Warner Center sits under its own Specific Plan, which requires coordination with LA’s Department of City Planning in addition to standard LADBS permitting. Fence height, style, and setback rules differ from the rest of Woodland Hills. We handle both agencies’ documentation and sequence the permits so the work isn’t delayed. Call (470) 298-9650 and we’ll walk you through the Warner Center requirements for your specific parcel.
Get Your Free Woodland Hills Fence Estimate
A fence in Woodland Hills is not a one-size-fits-all job. Your parcel might sit on loose Valley floor soil off Burbank Boulevard, or it might climb into the Chapter 7A fire zone south of Ventura Boulevard. Either way, you should see the price in writing before you decide. We’ll measure, spec the materials, check your parcel’s fire-zone status, and hand you a line-item quote with a written scope and a written warranty. No signed change order, no work proceeds. That’s the discipline that has kept Rowan Construction Group within a few percent of the agreed cost across 4,000-plus jobs. Call (470) 298-9650 to schedule your free estimate. We’ll put the number in writing before anyone picks up a tool.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Woodland Hills with documented pricing and fire-zone-compliant fence installation since 2007.







Before
After
Before
After