Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Miami, CA | Rowan Construction Group
We provide independent KraftMaid cabinet installation, refacing, and repair across Miami. The one thing that makes our KraftMaid work here different is that we build and anchor for Miami-Dade’s High-Velocity Hurricane Zone code, which most national KraftMaid installers have never had to meet. Led by Grant Rowan, our crews handle everything from single-cabinet fixes to full kitchen refits in CBS and high-rise construction. Call (470) 298-9650 for a written flat-price estimate before any work starts.
Why Miami Residents Choose Us for KraftMaid Service
We’ve been installing, repairing, and refitting KraftMaid sales & service cabinetry across Miami for over a decade. That time has been spent in the field with KraftMaid’s thermofoil, hardwood, and veneer lines, learning exactly where they fail in this climate and how to fix them so they don’t fail again. We’re an independent service provider, not a manufacturer affiliate, so our recommendations come from what holds up in Miami, not from a corporate parts catalog.
Grant Rowan trained in construction technology at Los Angeles Trade-Technical College, and two decades of residential and light commercial work have taught him that Miami’s salt air, humidity, and masonry walls reward whoever actually reads the substrate before drilling into it. Our crews carry the anchoring hardware and marine-grade components this city demands, and we write the price before we start. Under Clause 1 of the Haven Standard, that’s not a courtesy. It’s the whole point.
Common KraftMaid Construction Problems We Solve in Miami

- Peeling thermofoil on Vantage doors and drawer fronts. When kitchen humidity spikes during Miami’s rainy season, especially in CBS homes with limited cross-ventilation, the thermofoil layer on KraftMaid Vantage fronts delaminates along bottom rails. We replace the doors or reface the run with veneer and marine-grade hinges instead of chasing the peel.
- Loose frameless hinges on Venicia cabinets. KraftMaid Venicia’s frameless hinges loosen repeatedly in Miami’s soft limestone and hollow-block walls. Standard plastic anchors won’t hold. We retrofit with epoxy anchors and NOA-rated lag shields so doors stop sagging within weeks of install.
- Swollen particleboard cabinet boxes from slab moisture. Passport Series boxes swell and lose structural integrity when moisture migrates up from slab floors in Miami’s high water table. Base cabinet toe kicks crumble, end panels bow, and doors stop aligning. We seal the base with a moisture barrier and replace affected modules rather than patching the same swelling twice.
- Corroded drawer glides on Momentum cabinets. Within a mile of Biscayne Bay, salt air accelerates pitting on nickel-plated slides. Momentum drawers start sticking, then seize entirely. We upgrade to marine-grade aftermarket glides that outlast factory parts in this environment.
- Improper anchoring done by out-of-state installers. Miami permit inspectors reject cabinets installed with drywall anchors or undersized screws into CBS block. We see this all the time after national companies send crews without HVHZ training. The fix involves removing the cabinets, drilling proper lag shields into block or steel, and re-hanging to code.
Before
AfterKraftMaid Service in Miami: What Local Conditions Mean for Your Equipment
Here’s what most KraftMaid content online won’t tell you: Miami-Dade’s HVHZ building code requires wall cabinets and tall pantry units to be seismic- and wind-rated with NOA-listed anchoring. That means a KraftMaid kitchen in Miami needs heavy-duty lag shields into CBS block or steel studs with specific torque and embedment depth. This requirement is unique to this county. Orlando and Tampa don’t have it. If a contractor installs KraftMaid with generic Kraftmaid service in Hialeah instead of HVHZ-rated anchoring, the cabinets may pass the visual check and fail the structural one. We’ve seen permit inspectors reject upper cabinet anchors that were off by a half-inch on embedment. That’s the level of scrutiny Miami brings to your kitchen. Before our crews hang a single cabinet box, we verify the substrate, select the anchoring system that matches it, and document the install in the photo record you receive when we leave. No exceptions.
KraftMaid Models & Products We Service in Miami

We service KraftMaid Vantage, Venicia, Passport Series, and Momentum cabinetry across Miami service area. That includes full cabinet installation, refacing, island build-outs, and countertop coordination. Our approach on parts is simple: when color-matched OEM hinges, glides, and touch-up kits are available, we spec them. When the part will corrode again in Miami’s salt air within two years, we upgrade to marine-grade aftermarket components and tell you why on the written quote. We keep the most common Vantage and Momentum hinge sets, epoxy anchors, and moisture barrier materials stocked so Miami turnaround doesn’t wait on a national parts shipment. If a thermofoil door has delaminated on more than two edges or a cabinet box shows swelling beyond surface level, we’ll recommend replacing the affected module. Chasing recurring peeling is a losing game here.
KraftMaid Service Pricing in Miami
Here are the line-item ranges for KraftMaid cabinet and kitchen work in Miami. These are flat written prices, not estimates with change-order risk built in.
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
What drives the cost in Miami specifically: whether we’re anchoring into CBS block or steel studs, how much epoxy retrofitting the substrate needs, how many cabinets need refacing versus full replacement, whether moisture mitigation is required behind base cabinets on slab floors, and if your project includes Miami Driveway & Pavers work alongside the kitchen. Your free estimate includes a written scope, a written warranty, and a documented photo record of what we found when we looked. Call (470) 298-9650 to schedule yours. If you have a competitor’s written quote, bring it and we’ll review it line by line at no charge.
Serving Miami, FL - Our Local Coverage Area

We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - KraftMaid Construction in Miami
No, and we won’t try. Miami-Dade requires NOA-listed anchoring products for cabinet installation in high-rise and CBS construction, full stop. We use NOA-rated lag shields and epoxy anchors on every upper cabinet and tall pantry unit we hang in Miami. If a contractor tells you NOA doesn’t apply to cabinets, they’re wrong, and the permit inspector will catch it. Call (470) 298-9650 and we’ll document exactly what your building requires before anyone drills.
Because the replacement doors were likely installed without addressing the humidity swings causing the peel. In Miami’s rainy season, kitchens in CBS homes with limited cross-ventilation spike from 50% to 85% humidity in hours. Thermofoil expands and contracts at a different rate than the MDF substrate, and over time the adhesive bond fails along the bottom rails. If we replace the doors without sealing the cabinet boxes against slab moisture and upgrading ventilation, the new doors peel the same way. We address both or we don’t take the job. Call (470) 298-9650 for a written assessment.
Sometimes. If the swelling is confined to toe kicks or lower end panels and hasn’t compromised the box joints, we can cut out the damaged sections, seal the slab with a moisture barrier, and reinforce the remaining structure. If the particleboard has absorbed enough water that the box corners are soft or separating, replacement is the only honest fix. Miami’s water table sits 2-4 feet below grade, so slab moisture is a permanent condition, not a one-time leak. Call (470) 298-9650 and we’ll inspect it and tell you which category yours falls into before quoting anything.
Yes, and we’d upgrade rather than replace with the same part. Nickel-plated slides pit and corrode fast within a mile of Biscayne Bay. Factory glides will fail again in roughly the same timeframe. Marine-grade aftermarket glides cost a bit more and last dramatically longer in salt air. The gritty feel you’re describing is surface pitting starting to bind the bearing. Call (470) 298-9650 and we’ll spec the right glide for your proximity to the water and quote it flat.
For CBS block walls, we drill into the block void or solid web depending on where the cavity sits, then set NOA-rated lag shields or epoxy anchors at the embedment depth the code specifies. Upper cabinets and tall pantries get seismic and wind-rated anchoring. We verify substrate condition first, because older Hialeah homes sometimes have hollow, crumbling block that needs repair before any anchor will hold, and we can coordinate Fence Installation - Miami if your property needs perimeter work too. The process is documented in the photo record you receive when we finish. Call (470) 298-9650 for an exact quote on your kitchen’s layout.
Service Areas Near Miami

Our crews serve Miami and surrounding areas, including Hialeah, Little Havana, West Miami, Brickell, Edgewater, and South Beach. We also cover KraftMaid service in Oakland and KraftMaid service in Arlington for clients with properties in multiple metros.
Book Your KraftMaid Service in Miami Today
Call (470) 298-9650 to schedule your free written estimate. We’ll assess your KraftMaid cabinets, check your substrate against Miami-Dade code, and put the full price in writing before any work begins. Measure twice, say it once, show your work.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Miami since 2007.







Before
After
Before
After