Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Orlando, CA | Rowan Construction Group
Rowan Construction Group provides independent Mr-Glass service across Orlando, from impact window installations on International Drive towers to roller replacements in College Park bungalows. We also offer Tampa Mr Glass service for properties outside the metro area. Our crews have installed and serviced hundreds of Mr-Glass windows, doors, and enclosures since 2007, and we carry the park-specific credentials required to work on hospitality properties most contractors can’t even access. We’re not a manufacturer-authorized dealer, which means we answer to you, not a sales quota. If you need a Mr-Glass repair or installation in Orlando, call (470) 298-9650 and we’ll put a written price in front of you before anyone picks up a tool.
Why Orlando Residents Choose Us for Mr-Glass Service
We know Mr-Glass product lines the way a mechanic knows an engine: we can tell you what’s failing, what it should cost, and whether a repair is worth doing or a replacement makes more sense. The A-Series awning, the E-Series casement, the 6500 Series slider, and the Lifestyle patio door each have their own failure patterns in this climate, and we see them repeatedly because Orlando’s heat and humidity treat them roughly. Not every glazing contractor can say they’ve changed out fogged IGUs at a timeshare tower at 11 PM while coordinating with an Orange County tourism-district inspector. We have, and that experience travels to every residential job we take on. Grant Rowan, our owner, trained in construction technology at Los Angeles Trade-Technical College and has spent nearly two decades on residential and light commercial projects. Measure twice, say it once, show your work. That’s how we bid, and that’s how we build.
Common Mr-Glass Construction Problems We Solve in Orlando

- Thermal seal failure in dual-pane IGUs. After Orlando’s humid summer nights, interior fogging becomes a persistent problem when the seal between glass panes fails. We replace the insulated glass unit itself rather than masking the symptom, and we always source genuine Mr-Glass IGUs when the line is still in production.
- Worn roller assemblies in 6500 Series sliders. High-traffic resort condo units along International Drive go through rollers faster than anywhere else in the state. The panels get heavy, then misaligned, then they start chewing up the track. We carry Mr-Glass balance shoes and rollers in our local stock so a slider can be back to two-finger operation quickly.
- Weatherstripping degradation on A-Series awning windows. Daily UV exposure and afternoon thunderstorm wind-driven rain break down the weatherstripping on these windows faster in Orlando than in drier markets. The result is air and water infiltration around the sash perimeter. We replace with genuine Mr-Glass weatherstripping, not generic foam tape.
- Frame warping in older E-Series casements. West-facing elevations of 1970s CBS homes in Pine Hills and Azalea Park absorb intense afternoon heat, and older E-Series casement frames can warp enough that the sash no longer seats square. When the frame is warped, we recommend full unit replacement because a sash swap won’t fix the underlying geometry.
- Misaligned Lifestyle Series patio doors on 1950s concrete block homes. Conway and College Park CBS construction settles over decades, and door openings shift enough that patio door panels bind or drag. We address both the door hardware and the rough opening to restore smooth operation without disturbing the original stucco return.
Before
AfterMr-Glass Service in Orlando: What Local Conditions Mean for Your Equipment
Orlando’s construction market is split in two: the relentless hospitality build-out along the I-Drive/US-192 corridor, where contractors work overnight shifts and must meet entertainment-grade finish specs, and one of the fastest-growing residential pipelines in the country, with master-planned communities like Lake Nona and Horizon West absorbing thousands of new permits per year. Many of these same builders also rely on our Orlando Fence Installation team for perimeter work at new developments. For Mr-Glass owners, that split means the same product line sees two very different service demands. A 6500 Series slider in a resort tower handles hundreds of open-close cycles daily, while that same slider in a 1990s Horizon West tract home just has to survive Florida humidity and summer storms. We’re the independent shop that services both. Our repair crews carry multiple park-specific badges required to enter back-of-house areas at Disney and Universal properties after midnight, which means we can replace six fogged IGUs in a pool-deck slider wall at 11 PM and still have a crew in Conway the next morning swapping rollers on a 1950s CBS home. That’s not a brag. It’s just the reality of working in a city where hospitality and residential construction run parallel at this scale.
Mr-Glass Models & Products We Service in Orlando

We service the full Mr-Glass residential product range: A-Series awning windows, E-Series casement windows, 6500 Series sliding glass doors, and Lifestyle Series patio doors. We also install and repair Mr-Glass frameless glass shower enclosures, which we see frequently in hospitality work throughout Orlando. Our parts sourcing stance is simple: we always use genuine Mr-Glass replacement parts, including balance shoes, rollers, weatherstripping, and IGUs, to maintain exact fit and finish. For discontinued lines where original parts are no longer available, we’ll match with mil-spec aftermarket hardware only when the repair is cost-effective and the fit is precise. When a frame is warped or the glass package has failed beyond a simple sash swap, we’ll tell you honestly and recommend full unit replacement. Our local stock keeps common Mr-Glass parts ready for faster turnaround across Orlando. For a deeper look at the brand itself, see our Mr-Glass sales & service page.
Mr-Glass Service Pricing in Orlando
Every Mr-Glass job we quote gets a flat written price before work begins, with a written scope and written warranty. That’s Clause 1 of The Haven Standard, and it’s been our policy on 4,000-plus projects since 2007. Here’s what Mr-Glass work typically runs in Orlando:
| Service | Price Range |
|---|---|
| Impact Window Installation | $8,000 - $25,000 |
| Window Replacement | $4,500 - $15,000 |
| Frameless Glass Shower Enclosures | Custom-quoted |
What drives the cost? Frame condition, glass package, access to the opening, and whether you’re in a high-rise requiring boom lift work or a single-story CBS home with easy reach. A free estimate includes a written line-item price and a documented photo record of what we found. Call (470) 298-9650 to schedule yours.
Serving Orlando, FL - Our Local Coverage Area

We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help. Ask us about Driveway & Pavers in Orlando when you call.
FAQs - Mr-Glass Construction in Orlando
Yes. We remove the panel from the interior side and replace the rollers without cutting into the stucco return around the door. We’ve done this exact job on dozens of mid-century CBS homes across Conway, Pine Hills, and Azalea Park. Call (470) 298-9650 if your slider is getting heavy or dragging, and we’ll give you a written price before we touch it.
Under the updated Florida Building Code, any new addition or substantial renovation in Orlando must install impact-rated glazing, regardless of what the original 1970s CBS structure has. The original windows can remain, but new openings have to meet current wind-load and missile-impact standards. Call (470) 298-9650 and we’ll walk you through what your Pine Hills addition will require.
We handle the repair work directly and provide documentation of parts used, work performed, and the condition we found. For in-warranty Mr-Glass products, we’ll coordinate with whichever authorized channel the property uses, but we don’t pretend to be something we’re not. Our value on hospitality projects is the ability to work overnight hours, carry the required vendor credentials, and finish without disrupting guest operations. Written photos and a signed change order document every step. Call (470) 298-9650 if you manage a resort property on International Drive and need Mr-Glass work done after hours.
It depends on the failure. If the issue is a worn hinge, a failing seal, or a dulled roller on the door panel, repair is usually straightforward and cost-effective. If the glass itself is chipped, etched from hard water, or the frame is pulling away from the tile, replacement is the smarter money. We’ll give you a straight answer with a written price either way. Call (470) 298-9650 for a free estimate and documented assessment of your enclosure.
Sometimes. We start by checking whether the original factory color is still available through our Mr-Glass parts channels. If the exact finish is discontinued, we’ll source the closest mil-spec aftermarket match and show you a sample before ordering. If the mismatch would be visible from the street, we’ll tell you that and offer replacement options for the full unit instead. Call (470) 298-9650 and we’ll come out, document the window, and give you a written answer.
Service Areas Near Orlando

We serve Orlando’s metro and inner suburbs, including College Park, Conway, Pine Hills, Azalea Park, Horizon West, and Lake Nona. See our Orlando service area page for full neighborhood coverage. For other regional projects, you can also find our Mr-Glass service in Chula Vista and Mr-Glass service in St. Petersburg pages for details on those markets.
Book Your Mr-Glass Service in Orlando Today
You’ll get a written price before any work starts, a documented photo record when the crew leaves, and a 365-Day Done Right Promise on every completed job. Call (470) 298-9650 now to schedule your free Mr-Glass estimate in Orlando. A real person answers.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Orlando since 2007.







Before
After
Before
After