Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Fort Lauderdale
Fence installation in Fort Lauderdale runs $3,500 to $9,000 for a typical vinyl privacy fence, with aluminum running $4,000 to $10,000. The range depends on lot size, access, and whether your property sits on one of the city’s 165+ miles of canals, where Broward County permit requirements change the job before the first post hole is dug. We know the difference because we work these streets every week, from Coral Ridge to Rio Vista to the finger islands off Las Olas. Our crews are background-checked and uniformed, and every visit includes a documented photo record, so you can see exactly what was done. Call (470) 298-9650 for a written, flat-price estimate before any work starts.
Why Rowan Construction Group Is Fort Lauderdale’s Preferred Fence Installation Company
Rowan Construction Group has delivered 4,000-plus projects since 2007, every one with a written price before the first tool left the truck. That discipline matters in Fort Lauderdale, where a fence line is rarely just a fence line. On canal-front properties, Broward County ties fence permits to seawall condition, and a leaning post is often the first visible sign of hydrostatic pressure that has already undermined the adjacent CBS stem wall. Contractors who relocated from Orlando or Tampa rarely anticipate that until the stop-work order lands. We do, because we’ve opened enough Fort Lauderdale yards to know what’s under them.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. That’s not a slogan; it’s the operating rule Grant Rowan built the company on. No change proceeds without a signed change order, which is why our projects finish within a few percent of the agreed cost. Fort Lauderdale homeowners researching contractors read the three-star reviews and want the number in writing before they make contact. We give them exactly that, along with a 365-Day Done Right Promise: if it’s not done right, we make it right, backed by a terms page, not an asterisk.
We bring a Free Second Opinion on any written estimate. Bring us a competitor’s quote and we’ll review it line by line at no charge, checking whether they accounted for seawall contingencies, stainless-steel anchors, and the freeboard requirements that apply in FEMA AE zones. Most don’t. That review alone tells you whether the number you’re holding is real or will move once the county inspects.
Our Fence Installation Services in Fort Lauderdale
Wood Fence
Wood privacy fences remain common in Fort Lauderdale’s established neighborhoods like Lauderdale Manors and along the Oakland Park Boulevard corridor, where CBS homes from the 1950s to 1980s dominate the lots. But wood in this climate is a maintenance commitment. The salt air and heavy summer humidity shorten the life of untreated posts, and posts set in saturated canal-side fill rot or shift within two seasons if the crew skips a drainage course. We specify pressure-treated or naturally rot-resistant posts, set them in engineered concrete footers with an aggregate drainage base, and document the footer depth with photos before backfilling. That’s the difference between a fence that stands for 15 years and one that starts leaning after two.
Chain Link Fence
Chain link serves Fort Lauderdale properties that prioritize security and sightlines over privacy, especially on corner lots in neighborhoods like Coral Ridge Manors and along commercial frontages near US-1. Galvanized chain link with aluminum-coated wire holds up reasonably well to salt exposure, but the post and rail hardware is where failures start. We use polymer-coated posts and stainless fasteners on coastal-adjacent lots, because uncoated galvanized hardware near the ocean develops red rust within a few years. Chain link is also the most cost-effective option when the fence has to enclose an entire corner lot or run along a canal-side rear line.
Vinyl Fence
Vinyl fence installation in Fort Lauderdale typically runs $3,500 to $9,000 and is the most popular choice for homeowners who want a privacy barrier that won’t rot, warp, or require painting in the humid, salt-laden air. Vinyl doesn’t rust and doesn’t absorb moisture the way wood does, which matters on lots that sit just a few feet above the water table. The catch is installation depth and drainage, especially in the city’s FEMA AE and VE flood zones, where freeboard compliance affects footer design. We set vinyl posts in concrete footers engineered for the site’s flood-zone classification and soil saturation, and we photograph each footer before the post drops in, so you have evidence of what’s underground.
Aluminum Fence
Aluminum fence installation in Fort Lauderdale runs $4,000 to $10,000, and on the finger islands off Las Olas Isles, it’s often the right fence for the conditions. Aluminum won’t rust the way iron does, but that’s only true when the post bases are handled correctly. Installers who use uncoated anchors directly into salt-brackish fill violate manufacturer specs, and the posts corrode at the bases within a decade. We specify powder-coated aluminum posts with stainless-steel anchors and standoff bases that keep the metal out of standing water and salt-saturated soil. Every aluminum fence we install on Coral Ridge Isles or Rio Vista gets a photo record of the anchor detail, so you can see the spec was followed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fort Lauderdale
We source from a roster of over fifty vetted material brands, so the written quote gives you honest numbers rather than inflated ones. For Fort Lauderdale fence work, that includes specifying materials and hardware suited to salt-air exposure and canal-side moisture. We maintain stock of stainless-steel anchors, powder-coated aluminum components, and pressure-treated posts for fast turnaround on repairs across Plantation, Pompano Beach, Hollywood, and Margate. For homeowners considering a fence line as part of a larger backyard project, prefab ADU units from manufacturers like Abodu and Cover are engineered for specific site conditions, which shapes how we sequence the perimeter fence and the accessory structure. You’ll see every brand we specify in the written scope before work begins.
Common Fence Installation Problems We See in Fort Lauderdale Homes
- Posts set in saturated canal-side fill rot or shift within two seasons. The problem is almost always a missing drainage course under the concrete footer, which lets hydrostatic pressure push the footing out of plumb. We add an aggregate base layer and document footer depth before backfilling.
- Aluminum fences corrode at the post bases within a decade on canal-adjacent lots. This happens when installers use uncoated anchors directly into salt-brackish fill, violating manufacturer specs. We use stainless-steel anchors and standoff bases that keep the metal out of standing water.
- A privacy fence permit triggers a stop-work on a finger island. Broward County ties fence permits to seawall condition, and if the old seawall fails inspection, the job halts until a licensed marine contractor remediates it. We include a seawall assessment allowance in our written scope, so this isn’t a surprise.
- Wood posts rot at the soil line after just a few years. Salt air and high humidity accelerate decay in untreated or improperly flashed posts. We specify pressure-treated or naturally rot-resistant species and photograph the post base detail, so you know what was installed.
Pricing for Fence Installation in Fort Lauderdale, FL
Every fence quote in Fort Lauderdale should account for the lot’s flood-zone classification, the soil condition at the fence line, and whether a seawall assessment is required. Here’s what our written prices include:
| Service | Price Range (Fort Lauderdale) |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
Your written quote includes the flat price, the written scope, the written warranty, and any seawall assessment allowance that applies to your lot. That’s the Rowan standard under the Haven Standard, and it’s been the practice on every one of our 4,000-plus projects since 2007. Call (470) 298-9650 to schedule your free estimate. We’ll put the number in writing before anyone picks up a tool.
We Also Serve Cities Near Fort Lauderdale
Our crews serve the full greater Fort Lauderdale area from our South FL office, including Plantation, Pompano Beach, Hollywood, and Margate. If you’re considering a fence line on a canal-front lot anywhere in Broward County, the same written-price discipline and seawall contingency planning from our Fence Installation team applies. Learn more about our local coverage at Fort Lauderdale.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Fort Lauderdale
Broward County ties the structural stability of any structure near a canal to the condition of the seawall behind it, because a failing seawall can undermine the adjacent stem wall and any fence footers poured into it. A fence permit on a finger-island lot often won’t clear until a licensed marine contractor certifies the seawall is sound, and if it isn’t, the fence job waits until remediation happens. We include a seawall assessment allowance in our written scope for canal-front properties, so this requirement doesn’t add cost or delay we didn’t tell you about on day one. Call (470) 298-9650 to discuss your specific lot and whether the assessment applies.
Salt air on the Las Olas Isles accelerates chloride-driven corrosion at the post bases, especially where aluminum posts meet uncoated anchors or direct fill contact. An aluminum fence that would last 20 years inland can fail at the base within a decade here if the anchor detail isn’t specified correctly. We use stainless-steel anchors and standoff bases that keep the aluminum out of standing water and salt-saturated soil, and we photograph the anchor detail on every install. Bring us a competitor’s quote and we’ll review whether their anchor spec will hold up on your street, free of charge.
When we find a corroded CBS stem wall under a fence line, the change order covers concrete repair or reinforcement, any required marine contractor work, and the re-set of the fence with upgraded anchors and footers. Under The Haven Standard, no work proceeds on that change until you sign the change order and approve the written price. In Rio Vista, we opened a scoped backyard privacy fence and found the posts had been poured into a corroded stem wall tied to a failing canal seawall; we sequenced with a marine contractor, remediated the seawall, and reset the fence with stainless-steel anchors and an engineered concrete footer up to Broward County freeboard. No change order was needed, because we had written seawall contingencies into the original scope of work. Call (470) 298-9650 for a written scope that anticipates this before it’s a stop-work situation.
Yes, but it depends on the tieback layout and the condition of the seawall cap and soil behind it. Fence footers placed within the tieback zone can load the seawall and reduce its capacity, so we set footers outside the influence zone and use shallow, wide footers designed to spread load rather than deep footers that could interfere with tieback anchors. We review the seawall engineering and the county permit conditions before we finalize the fence layout. Call (470) 298-9650 to have us look at your seawall as part of the free estimate.
In FEMA AE flood zones, which cover much of Fort Lauderdale at 2 to 6 feet above sea level, fence footers must be designed so they don’t obstruct floodwater flow or compromise the freeboard elevation of any adjacent structure. Our footers are sized and set to meet Broward County floodplain requirements, and we document the footer depth and drainage course with photos before backfilling. We include the flood-zone design in your written scope, so the permit package is complete the first time. Call (470) 298-9650 to schedule your free estimate, and we’ll review your parcel’s flood-zone classification as part of the quote.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Fort Lauderdale since 2007.